top of page

Ready for the FTA? Agri-food Technologies

16 minutes ago
6 min read

Agri-food technologies and the EU–India FTA: duties on farm machinery go immediately, on bottling lines over eight years


India is the world's largest tractor market: in the first nine months of 2026 it registered almost 900,000 and, according to FederUnacoma, it is on course to exceed one million units a year, about 40% of the world market. It is also one of the fastest-changing food industries. Even so, for the Italian technologies that serve the field and the food factory (agricultural machinery, food and beverage processing plants, bottling, dairy and milling machinery) it is still a small market: €108 million of exports in 2025. There is ample room to grow.

The Indian market matters all the more at a difficult time for the sector. On the eve of EIMA International 2026 in Bologna, FederUnacoma described a world tractor market losing momentum: −13% in the United States in the first nine months of the year, −6% in Germany, −46% in Turkey. For 2026 the association expects the turnover of the Italian industry to fall by 4.3% and its agricultural machinery exports by 5.1%. India and China are the exceptions, supported by public incentives for mechanisation.

The EU–India Free Trade Agreement (FTA) removes an average duty of 7.8% from these machines and brings it to zero on every tariff line by 2034, with no exclusions. It is one of the most open sectors in the agreement: more than two lines in three go to zero at entry into force, expected in 2027. By value, however, the share that goes to zero immediately is much smaller, 28%, because the largest item in Italian exports, bottling machinery, follows the eight-year path.

In this analysis we read the agreement's tariff schedules line by line, sub-sector by sub-sector and in both directions.


The big picture: an average duty of 7.8% that disappears entirely

The agri-food technology sector covers 68 eight-digit Indian tariff lines. The base duty, that is the basic customs duty plus the social welfare surcharge, ranges from 5.5% on food-processing machinery to 11% on some mowers and hand-operated appliances; the average is 7.8%.

The agreement removes it in three steps:

  • 68% of lines at zero immediately, from entry into force: 28% of Italian export value;

  • 79% by 2032, 38% by value;

  • 100% by 2034, by lines and by value. No line in the sector is excluded.

Averages by line and by value tell two different stories. Counted by line, agricultural machinery weighs heavily, and all of it goes to zero immediately. Counted by value, bottling weighs more, and it reaches zero only in 2034. The average duty per line therefore falls from 7.8% today to 2.0% as early as 2027, 1.0% in 2030 and zero in 2034; for those selling bottling lines the path is slower.

As with mechanical engineering, the agreement removes customs duty but not IGST, India's import tax equivalent to VAT. A registered buyer recovers it as an input tax credit, and companies selling through their own subsidiary remain subject to review by the Special Valuation Branch of prices between companies of the same group.


Sub-sector by sub-sector

The chart shows, for each sub-sector, the year in which India's duty reaches zero and the share of lines at each deadline. On the right are today's average duty and Italian exports in 2025: sub-sectors are ordered from the fastest to reach zero to the slowest.



  • Agricultural machinery: all at once. Ploughs, harrows, seed drills, fertiliser spreaders, mowers, balers, combine harvesters, livestock machinery and incubators, with their parts: all 36 lines go to zero from entry into force. It is the sector's clearest advantage, and it arrives on day one. It is also where Indian demand is heading: according to the Italian Trade Agency (ICE) and FederUnacoma, the agricultural machinery market, worth $13.7 billion in 2023, could exceed $31 billion by 2033; tractors account for 86% of it today, but implements and other farm machines are growing, and public incentives are being extended to sowing, transplanting and harvesting.

  • Food industry: it depends on the line. Machines for sugar, brewing, soya and tea go to zero immediately. Machines for bakery and pasta, confectionery and chocolate, meat, fruit and vegetables come down over six years: from 5.5% today to 4.6% in 2027 and to zero in 2032. Other machines and parts reach zero in 2034.

  • Bottling: eight years. Machines for washing and drying bottles (8.3%) and for filling, closing, sealing and labelling (5.5%) follow the path of eight annual cuts. By 2030 the duty is halved; in 2034 it reaches zero.

  • Dairy, winemaking, milling. Milking machines, dairy machinery, wine and juice presses, and flour and rice milling machinery come down over eight years. Spare parts for dairy machinery, presses and flour mills, on the other hand, are at zero immediately.

For complete plants, classification deserves attention. A line made up of several machines may be classified as a functional unit under the heading of its main function, and so follow a single tariff path: it is worth checking before quoting.


The other flow: Indian agri-food technologies in Europe

In the other direction the agreement changes very little. Many agricultural machines already enter the EU duty-free today, and on the other lines the EU duty does not exceed 2.7%: the average across the 67 lines of the EU schedule is 0.7%. Under the agreement they all go to zero at entry into force.



In 2025 Italy imported €22 million of agri-food technologies from India, about a fifth of what it exported there: €12 million of agricultural machinery and €9 million of food-processing machinery. The agreement does not appreciably change Indian competition in Europe.

The asymmetry is clear: the EU gives up an average duty of 0.7%, India one of 7.8%. For Italian companies, the agreement's benefit in this sector lies almost entirely on the export side.


What to do now

The sector moves at two speeds, and strategy should be calibrated to the speed of your own product.

  1. Agricultural machinery: prepare the launch. The advantage arrives in full at entry into force. Those who want to make the most of it need a dealer network, service and spare parts in place by 2027, along with products suited to Indian farms, which are often small.

  2. Bottling and food lines: build price lists around the path. With six or eight years of reductions, the advantage grows every 1 January. Offers and multi-year contracts can already factor it in.

  3. Check classification. The path depends on the eight-digit line; for complete plants, classification as a functional unit also matters.

  4. Check origin. The preferential duty applies only to machines that meet the agreement's rules of origin. Those using non-EU components should check the rules specific to their product and prepare the origin documentation.

  5. Make use of industry platforms. EIMA Agrimach, the New Delhi fair organised by FederUnacoma and FICCI, is the natural showcase for Italian agricultural machinery in India. The ninth edition, in November 2025, drew more than 41,000 visitors and over 180 exhibitors; the tenth is scheduled for 2–4 December 2027 and, if the agreement enters into force in 2027 as expected, will be the first with European agricultural machinery already duty-free. At EIMA International 2026, FederUnacoma devoted an Italy–India day to agricultural machinery markets in the free trade area, with FICCI, SACE and SIMEST, which offer guarantees and financing to companies exporting to or investing in India.

Those who move now, before duties fall, can build relationships, service networks and brand recognition. Competitors who arrive later will find the ground already taken.

For more, the Chamber's page on the agreement is www.indiaitaly.com/ftaindiaeu. Companies that want to understand what changes for their products can book an FTA Impact Call, a 25-minute call with our team.


Methodology and sources

Scope. Sector B2 (Agri-food technologies) of the 14-sector taxonomy of the Italy–India Economic Observatory, version of 7 November 2026: HS4 headings 8210 and 8432–8438, plus the lines of heading 8422 covering the washing, filling and closing of bottles and containers. In all, 68 Indian tariff lines and 67 EU lines. Tractors fall under sector B5 (Automotive and components), packaging machinery under B1 (Mechanical engineering).

Calculations. Shares count the eight-digit tariff lines in the agreement's schedules: Appendix 2-A-2 for India, Appendix 2-A-1 for the EU. The average duty is a simple average of base duties, not weighted by trade value. Shares by value use 2025 exports and imports from the Observatory's database, split equally among the Indian lines of each HS4 heading. For bottling, exports are an estimate: each line of heading 8422 counts for one eighth of the heading's exports.

Timing. Entry into force is assumed in 2027. Cuts after the first take effect on 1 January each year, as provided in Annex 2-A.

Sources

Comments

Rated 0 out of 5 stars.
No ratings yet

Add a rating
bottom of page